Moog MPT-90 User Manual

____________________________________________________________________
_______________________________________________________________________
MN0090-05 Page 55 of 68 18008
MPT-90 PRODUCT MANUAL This document contains U.S. export controlled technical data as regulated by the U.S. Export Administration Regulations 15 CFR Parts 730-774, export, disclosure or transfer contrary to U.S. law is prohibited.
Restore Factory Defaults:
Pressing the “Restore Defaults” button restores the following settings:
Device
Configuration
Module Name:
Moog MPT
Network Interface:
DHCP / Auto IP
Static IP address:
0.0.0.0
Default gateway IP address:
0.0.0.0
Subnet mask (used on if static
IP is in use):
255.255.255.0
Control
Port
Payload
Port 1
Payload
Port 2
Payload
Port 3
Payload
Port 4
Control and Payload Ports
Baud Rate:
2200000
115200
115200
115200
115200
Data Bits:
8
8
8
8
8
Parity:
none
none
none
none
none
Stop Bits:
1
1
1
1
1
Flow Control
none
none
none
none
none
Telnet Session
Timeout:
0
0
0
0
0
Telnet Session listen
or local port number:
10001
10002
10003
10004
10005
Telnet Session remote
port number (when in
client mode):
10001
10002
10003
10004
10005
IP address to which a
connection will be
made when in telnet
client mode:
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Operating mode:
telnet server, row
protocol
telnet
server, raw
protocol
telnet
server, raw
protocol
telnet
server, raw
protocol
telnet
server, raw
protocol
telnet
server, raw
protocol
Hardware Interface:
none
none
none
none
none

Moog MPT-90 Specifications

General

Brand	Moog
Model	MPT-90
Category	Security System
Language	English