Docking the V300 Body-Worn Camera
Docking the V300 Camera in a Transfer
Station II
Important! Set up and configure the Transfer Station II for use with Evidence Library
(EL). See the Evidence Library Online Help and the Transfer Station II Quick Start User
Guide.
When you dock the V300 Camera and battery in a Transfer Station II:
l The V300 stand-alone battery charges
l The V300 time and date synchronize with the Evidence Library (EL) system
Caution: The V300 sets its internal date and time from the EL computer. If the computer
date and time is set incorrectly, the camera will be set incorrectly, and your video
evidence will be marked with the incorrect date and time.
While docked:
l The camera communicates to the EL software that it has recorded events to upload. The Transfer
Station II can upload from eight cameras simultaneously.
l EL sends commands and requests to the camera:
o
Mark any imported recorded events as import confirmed
Events confirmed as imported are immediately unprotected. This makes the storage space
available to be reused.
o
Update the configuration
o
Stage a firmware upgrade
After staging, the upgrade is immediately applied to the camera.
o
The WiFi base software and/or firmware can be downloaded to the V300
30
V300 Body-Worn Camera User Guide
WGD00169, Revision B
To Next Page
Loading...
Need help?
General
