Appendix: Transfer Station II
Transfer Station II Setup Overview
The Transfer Station II lets your agency upload video evidence to Evidence Library (EL) software from
multiple V300 Cameras simultaneously. Each Transfer Station II has eight slots for the V300 Cameras
and stand-alone batteries. You can connect multiple transfer stations to one instance of Evidence
Library software, but you must set up and configure each Transfer Station II separately.î
Important! Use the Transfer Station II to upload events to EL.
When the transfer station is on, the power LED is on. To set up the Transfer Station II:
1. Set up the Transfer Station II hardware. (page 1)
2. Configure the Transfer Station II in Evidence Library (EL) so the V300 Cameras docked in it will upload
to EL. (page 74)
Important! An administrator should set up the Transfer Station II, or your IT administrator
should be on-call.
72
V300 Body-Worn Camera User Guide
WGD00169, Revision B
To Next Page
Loading...
