Appendix: Transfer Station II
7. Click Save Settings.
Because the Transfer Station II IP address changed, the default configuration web page is no longer
valid and the system logs you out.
V300 Settings
1. Complete the V300 Settings.
2. Enter your Static IP addresses for each slot.
This window does not appear if you choose DHCP server assigned address.
3. Click Save V300 Settings.
DHCP IP Config
If you choose to go with DHCP for your IP Config, complete the two screens shown here.
76
V300 Body-Worn Camera User Guide
WGD00169, Revision B
To Next Page
Loading...
