About the Features of the V300 Camera
Connections
The WiFi base has connections for a Wi-Fi antenna cable and a
provided custom power and data cable on the back.
Setting up the WiFi base
Typically, the WiFi base and the Distributed Multi-Peer Recording
are installed in the vehicle by your agency installation technicians.
For more information about installing the V300 system equipment
in the vehicle, see the 4RE Vehicle Installation Instructions.
Remote upgrade Wi-Fi base
Upgrading the Wi-Fi base is similar to upgrading the V300 Body-
Worn Camera. The V300 retrieves the WiFi base upgrade file just
as it retrieves the upgrade file for the camera.
The upgrade file for the WiFi base is downloaded while the V300 Body-Worn Camera is docked in the
transfer station. The WiFi base initiates the upgrade and pulls the information when the V300 is docked
with the base.
V300 Camera display
When V300 is paired with the WiFi base, the camera display shows a Wi-Fi Signal Strength icon (
) that indicates the strength of the Wi-Fi signal coming from the WiFi base.
58
V300 Body-Worn Camera User Guide
WGD00169, Revision B
To Next Page
Loading...
