LEDs for WiFi base
LEDs for WiFi base
October 2020
Left LED
Left LED (red and green)
LED State WiFi base state
No light Powered off
Red Solid Charge error
Red Blinking Error condition
Pairing not successful
Red Blinking Error condition
Green Solid Fully charged
Green Blinking In shutdown or wireless upload
timeout period
The left LED on the WiFi base blinks green when it successfully pairs with a V300. The LED blinks red if
the pairing was not successful.
Note: If you get a solid red light, try undocking and redocking your camera and battery. If
solid red appears repeatably, contact Customer Service.
Right LED
Right LED (green and amber) WiFi base state
LED state State
Not connected to
camera or upload
server
Off WiFi base Connected to
Distributed Multi-Peer
Recording upload
server (EL)
Amber Solid
Amber Blinking Activity with upload
server (EL)
Green Solid Connected to camera
(Wi-Fi connection)
Green Blinking Activity with camera
(Wi-Fi connection)
If two cameras are paired with the same WiFi base, and one is docked, the WiFi base LEDs show the
state of the docked camera and pair.
V300 Body-Worn Camera User Guide
WGD00169, Revision B
57
To Next Page
Loading...
