Using V300 in a recording group
join the group by starting their own recorded events.
l Responds to group-recording starts or stops by other group members
Through the recording group network, the WiFi base is notified by other group members when they start
or stop a group recording. The base then notifies the cameras and a camera can start or stop its own
recorded event with the recording group.
Tip: If the 4RE DVR or V300 Cameras are members of the same recording group, 4RE
can initiate group event starts, stops, and categorization and V300 can join in on the group
actions depending on the EL configuration.
Important! If a V300 moves out of range of its associated recording group network, it
does not receive notifications of group recording starts and stops until it is back in range.
Smart Power Switch (SPS)
As part of the local recording group network, the SPS:
l Functions as the central connection point for a recording group
Through the switch, the devices connect together to form a network, letting the 4RE DVR and/or
[[[Undefined variable Variables.G2WShort]]] group members communicate with each other.
l Intelligently manages power within the local recording group network
The SPS can detect the status of the devices in the network, whether they are powered on or have
powered themselves off after finishing event upload or charging. When the switch detects that the
devices in the local recording group network no longer need power, it shuts down any remaining devices
connected to the local network, including itself.
l Functions as the local network DHCP server for the local recording group network and other devices
connected to it (for example, wireless radio)
The SPS is required to form a recording group. There can only be one Smart Power Switch in a
recording group.
42
V300 Body-Worn Camera User Guide
WGD00169, Revision B
To Next Page
Loading...
