Display in different modes
l Wi-Fi or GPS signal status
The Wi-Fi Signal Strength icon shows the status of the V300 Wi-Fi connection with the WiFi base.
Display in different modes
l When the camera is not recording, the default message shown on the display is the number of recorded
events in storage.
l When the camera is in Covert mode (Covert mode) and not recording, the default shown on the display is
Covert
l When the camera is recording, the default shown on the display is the recording length.
Feedback Indicators
Apart from the displays, all models of V300 Body-Worn Camera can provide feedback on their status
using:
l Tones
l Vibration
l Red and green LEDs
All of these feedback indicators are configurable in Evidence Library. You can set up the tones and
vibration to alert with:
l Tone only
l Vibration only
l Tone and vibration together
l No tone or vibration
Note: If you place the camera in Covert mode, no tones sound and the LEDs do not light.
V300 Body-Worn Camera User Guide
WGD00169, Revision B
49
To Next Page
Loading...
