Motorola APX 2000 Detailed Service Manual

5-56 Troubleshooting Charts: Bluetooth Failure
Bluetooth Failure – Page 4 (LCD Indication)
4
No
Replace
Keypad
board
Indication
just after
power-up?
HW BRD
ABSENT?
New or unknown
indication.
Contact SW for
detail.
Power off radio.
Open radio and
check the front-
kit and back-kit
flex connection
on keypad board.
Power on radio.
Yes
Yes
HW BRD
ABSENT?
BT ON
FAILED?
No
No
Clear All
Pairing
Failed?
Yes
No
If BT on/off soft - key or
pressing ‘CLR’ key in BT
menu triggers message, reload
radio SW and retry.
Yes
Yes
Clear All
Pairing
Failed?
Replace
Keypad
board
Yes
Try to enable BT again. If no
button is programmed to turn BT
on, use CPS to set a menu item to
turn it on. Recycle radio and retry.
No
BT ON
FAILED?
No
5
Reload SW in
APX radio.
Enable BT and
recycle radio
power.
No
No
Yes
BT ON
FAILED?
Yes
Replace
Keypad
board

Motorola APX 2000 Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Optional
Bluetooth	No
Frequency Range	700/800 MHz
Power Output	1-5 W (VHF), 1-3 W (700/800 MHz)
Channels	Up to 1, 000
Battery Life	Up to 10 hours (digital)
Digital Protocol	APCO P25
Frequency	VHF: 136-174 MHz, UHF: 380-470 MHz, 700/800 MHz: 764-870 MHz
Power	1-3W (700/800 MHz), 1-5W (VHF)