KEYBOARD WEDGE INTERFACE 6 - 9
Function Key Mapping
ASCII values under 32 are normally sent as control key sequences (see Table 6-2 on page 6-12). When this
parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not
have a bold entry remain the same whether or not this parameter is enabled.
FN1 Substitution
When enabled, the linear imager replaces FN1 characters in an EAN128 bar code with a keystroke chosen by
the user (see FN1 Substitution Values on page 7-26).
Enable Function Key Mapping
*Disable Function Key Mapping
Enable FN1 Substitution
*Disable FN1 Substitution
To Next Page
Loading...
