Motorola LI2208 - Time Delay to Presentation Sleep Mode

USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 7 - 17
Time Delay to Presentation Sleep Mode
Parameter # F1h 96h
In Presentation Mode, this parameter sets the time the linear imager remains active before entering sleep
mode with no illumination. The linear imager wakes when it senses motion, upon presentation of a bar code, or
a trigger pull.
NOTE Linear imager scanner performance is not guaranteed in dim conditions.
Disable
(00h)
1 Second
(01h)
10 Seconds
(0Ah)
1 Minute
(11h)
*5 Minutes
(15h)