KEYBOARD WEDGE INTERFACE 6 - 5
Ignore Unknown Characters
Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown
Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound on
the linear imager. When Do Not Send Bar Codes With Unknown Characters is selected, bar code data is
sent up to the first unknown character, then the linear imager issues an error beep.
Keystroke Delay
This is the delay in milliseconds between emulated keystrokes. Scan a bar code below to increase the delay
when hosts require a slower transmission of data.
*Send Bar Codes with Unknown Characters
Do Not Send Bar Codes with Unknown Characters
*No Delay
Medium Delay (20 msec)
Long Delay (40 msec)
To Next Page
Loading...
