USB INTERFACE 3 - 21
Toshiba TEC Include Header
This single bit option chooses whether or not the header character is prefixed onto the decoded data before
transmission. The default header character is the STX (0x02) character. That can be changed with the Toshiba
TEC Header Character parameters listed below.
Toshiba TEC Include Terminator
This single bit option chooses whether or not the terminator character(s) are appended onto the decoded data
before transmission. The default terminator character is the ETX (0x03) character. That can be changed with
the Toshiba TEC Terminator Character parameters listed below. Additionally, there is an ability to specify one
or two terminator characters. The default is no second terminator.
* Add Header Character
Do Not Add Header Character
* Add Terminator Character (s)
Do Not Add Terminator Character (s)
To Next Page
Loading...
