Motorola LI2208 - IBM 468 X;469 X Host Parameters; Port Address

5 - 4 LI2208 Product Reference Guide
IBM 468X/469X Host Parameters
Port Address
This parameter sets the IBM 468X/469X port used. User selection is required to configure this interface The
Auto-Host Detect Cable feature automatically detects the host interface type, but there is no default setting.
Scan one of the bar codes below to select the appropriate port.
NOTE Scanning one of these bar codes enables the RS-485 interface on the linear imager.
*None Selected
Hand-held Scanner Emulation (Port 9B)
Non-IBM Scanner Emulation (Port 5B)
Table-top Scanner Emulation (Port 17)