Motorola LI2208 - Page 336

A - 6 LI2208 Product Reference Guide
Code 11 Disable 9-40
Set Length(s) for Code 11 4 to 80 9-40
Code 11 Check Digit Verification Disable 9-42
Transmit Code 11 Check Digit(s) Disable 9-43
Interleaved 2 of 5 (ITF)
Interleaved 2 of 5 (ITF) Enable
(I 2 of 5 Security Level must be
set to 1)
9-44
Set Length(s) for I 2 of 5 Length Within Range - 6 to 80 9-44
I 2 of 5 Check Digit Verification Disable 9-46
Transmit I 2 of 5 Check Digit Disable 9-46
Convert I 2 of 5 to EAN 13 Disable 9-47
I 2 of 5 Security Level 1 9-48
Discrete 2 of 5 (DTF)
Discrete 2 of 5 Disable 9-49
Set Length(s) for D 2 of 5 Any Length - 1 to 55 9-49
Codabar (NW - 7)
Codabar Enable 9-51
Set Length(s) for Codabar 4 to 60 9-51
CLSI Editing Disable 9-53
NOTIS Editing Disable 9-53
Codabar Upper or Lower Case Start/Stop Characters
Detection
Upper Case 9-54
MSI
MSI Disable 9-55
Set Length(s) for MSI 4 to 55 9-55
MSI Check Digits 1 9-57
Transmit MSI Check Digit Disable 9-57
MSI Check Digit Algorithm Mod 10/Mod 10 9-58
Chinese 2 of 5
Enable/Disable Chinese 2 of 5 Disable 9-59
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.