1. Export the settings before Enterprise Reset, and Import the same after Enterprise Reset.
2. Copy the key-config.xml file to folder /enterprise/device/settings/keypad/ before the
Enterprise Reset. After the Enterprise Reset the key configuration will be automatically applied from this file.
Enable Key Wakeup
Procedure:
1
Touch
.
2
Touch Key Programmer.
Figure 92: Key Programmer Screen
3
Touch
.
4 Touch Wake-up enables.
Figure 93: Wake-up Enables
5 Touch the checkbox next to the key to enable wake up.
On the MC32N0–G, Trigger-1 is the scan key and Trigger-2 is the Triger.
On the MC32N0–R/S, Trigger-1 is the scan key and Trigger-2 is the right and left scan butons.
6
Press
.
Settings for Android Devices | 113
MN000887A01-B | April 2015
To Next Page
Loading...
