Motorola MC32N0 - Chapter 9: Settings for Wince Devices; Interactive Sensor Technology Configuration; Display Tab; Power Management Tab

Chapter
9
Settings for WinCE Devices
This chapter describes settings available for configuring the device.
Interactive Sensor Technology Configuration
This chapter provides information for configuring the Interactive Sensor Technology (IST) settings. IST settings can
be accessed:
Tap Start > Settings > System > IST Settings icon.
Display Tab
Use the Display tab configure display interaction settings.
Figure 112: Display Tab
The Auto Orientation parameter controls the display rotation according to the MC32N0 orientation. Select the Auto
Orientation checkbox to enable this feature. Auto orientation is disabled by default.
Power Management Tab
Use the Power Management tab to configure power management settings.
135 | Settings for WinCE Devices
MN000887A01-B | April 2015