5 Click Finish or Setup.
Figure 111: Connected Window
During the first synchronization, information stored on the MC32N0 is copied to the host computer. When the
copy is complete and all data is synchronized, the MC32N0 can be disconnect from the host computer.
Note: The first synchronization operation must be performed with a local direct connection. To retain
partnerships after a cold boot, capture partnership registry information in a .reg file and save it in the
Flash File System, detailed information is provided in the EMDK Windows CE Help File for the
MC32N0.
For more information about using ActiveSync or WMDC, start the application on the host computer, then see
Help.
Synchronization | 133
MN000887A01-B | April 2015
To Next Page
Loading...
Need help?
General