Error Text
Error
Number
Probable Cause
Can't read from the
source device
-9 The source device (either USB or SDMMC) could not be read from. Check
source device connectivity and retry.
Can't write to the
destination device
-10 The destination device (either NAND, RAM, Power Micro, IST, Keyboard
Controller or CPLD) could not be written to. Retry the download. If the failure
persists, it is most likely due to a hardware failure; the mobile computer requires
servicing.
Transmission check-
sum error
-11 An error occurred during transmission from the source device (either USB or
SDMMC) and the checksum check failed. Check source device connectivity and
retry.
Readback checksum
error
-12 A checksum, generated from reading back data that was written to the destina-
tion device, was incorrect. An error during transmission or a write error to the
destination device could cause this.
There is no more
heap space available
-14 There is no more heap space available for the download procedure. Restart
Bootloader and retry the download. If the failure persists, contact service with
details of what is being downloaded.
Invalid data in veri-
fy file
-19 The file contains invalid data. Check that the file is suitable for downloading on
this terminal.
Insufficient memory
for buffering data
-20 There is no more heap space available for the download procedure. Restart
Bootloader and retry the download. If the failure persists, contact service with
details of what is being downloaded.
Insufficient data
available to com-
plete record
-21 A HEX file download was attempted but the HEX file is invalid. Ensure the file
is in proper HEX file format.
Invalid Symbol
HEX file
-23 A HEX file download was attempted but the HEX file is invalid. Ensure the file
is in proper HEX file format.
Unrecognized or un-
supported HEX re-
cord
-24 The HEX file being downloaded contains an invalid or unrecognized HEX re-
cord. Ensure the file is in proper HEX file format.
Invalid data in HEX
file
-25 The HEX file being downloaded contains invalid data. Ensure the file is in prop-
er HEX file format with valid HEX data.
Exceeded max size -26 The download file is too large to fit into the space allocated for it. Either make
the file smaller or increase the space allocated for it by altering the partition ta-
ble.
Partition is not valid
on this device
-27 The downloaded file specifies a partition entry that does not exist on the device.
Only download files that are valid for this device, or change the partition table
so that the new file is valid on the device.
Wrong destination
code
-28 A specific partition was chosen from the Bootloader main menu but the file se-
lected for download was for another partition. Ensure that the partition selected
from the Bootloader main menu matches the file selected for download.
Non-contiguous re-
cord found
-30 A HEX file download was attempted but the HEX file is invalid. Ensure the file
is in proper HEX file format.
Timed Out - No da-
ta
-31 Bootloader was waiting for data from the source device but timed out before re-
ceiving any. Check the source device connectivity and retry.
Table continued…
156 | Application Deployment for Windows CE
April 2015 | MN000887A01-B
To Next Page
Loading...
Need help?
General