Motorola MC32N0 User Manual

• Proxy Settings
• Static IP.
Configuring Ethernet Proxy Settings
The MC32N0 includes Ethernet cradle drivers. After inserting the MC32N0, configure the Ethernet connection:
Procedure:
1
Touch .
2
Touch
.
3 Touch Ethernet.
4 Slide the switch to the ON position.
5 Place the MC32N0 into the Ethernet cradle slot.
6 Touch and hold Eth0 until the menu appears.
7 Touch Modify Proxy.
Figure 32: Ethernet Proxy Settings
8 Touch the Proxy settings drop-down list and select Manual.
9 In the Proxy hostname field, enter the proxy server address.
10 In the Proxy port field, enter the proxy server port number.
11 Note: When entering proxy addresses in the Bypass proxy for field, do not use spaces or carriage
returns between addresses.
In the Bypass proxy for text box, enter addresses for web sites that do not require to go through the proxy server.
Use the separator “|” between addresses.
12 Touch Modify.
13
Touch .
Configuring Ethernet Static IP Address
The MC32N0 includes Ethernet cradle drivers. After inserting the MC32N0, configure the Ethernet connection:
Procedure:
1
Touch
.
2
Touch .
3 Touch Ethernet.
4 Slide the switch to the ON position.
42 | Accessories
April 2015 | MN000887A01-B

Motorola MC32N0 Specifications

General

Brand	Motorola
Model	MC32N0
Category	Handhelds
Language	English