Motorola MC32N0 User Manual

Figure 44: Remove Button from Loop
2 Remove loop section from handle.
3 Separate the loop and hook tape and pull the handstrap through the slot at the bottom of the device.
4 Insert one end of the new loop section into the mounting slot in the handle.
5 Thread the other end of the loop section through the loop and pull to tighten the loop.
Figure 45: Thread Loop
6 Slip the button into the loop section.
Accessories | 51
MN000887A01-B | April 2015

Motorola MC32N0 Specifications

General

Brand	Motorola
Model	MC32N0
Category	Handhelds
Language	English