Motorola MC65 Guide

Getting Started 1 - 9
Performing a Clean Boot
A clean boot resets the MC65 to the factory default settings. All data in the Application folder is retained. You must
download the Clean Boot Package file from the Support Central web site, http://supportcentral.motorola.com and
install on the MC65.
To perform a clean boot:
1. Download the Clean Boot Package from the Support Central web site. Follow the instructions included in the
package for installing the package onto the MC65.
2. Perform a reset.
3. Immediately, as soon as the device starts to boot and before the splash screen is visible, press and hold the
left scan button.
4. Insert the MC65 into a powered cradle.
5. The MC65 updates and then resets.
6. Calibrate the screen.
Waking the MC65
The wake-up conditions define what actions wake up the MC65 after it has gone into suspend mode. The MC65
can go into suspend mode by either pressing the Power button or automatically by time-out settings
CAUTION A clean boot should only be performed by an authorized system administrator. You must connect the
MC65 to AC power during a clean boot.
Removing AC power from the MC65 during a clean boot may render the MC65 inoperable.
Table 1-2 Wake-up Default Settings
Condition for Wake-up Power Button Automatic Time-out
AC power is applied. No Yes
MC65 is inserted into a cradle. Yes Yes
MC65 is removed from a cradle. Yes Yes
MC65 is connected to a USB device. No Yes
MC65 is disconnected from a USB device. No Yes
A key is pressed. No No
The scan triggered is pressed. Yes Yes
The screen is touched. No No
Bluetooth communication Yes Yes
Incoming phone call Yes Yes

Motorola MC65 Specifications

General

Brand	Motorola
Model	MC65
Category	Handhelds
Language	English