5 - 8 MC65 Integrator Guide
7. Tap OK to confirm the change.
Disabling a PIN
1. Deselect the Require PIN when phone is used check box.
2. Use the dialer keypad to enter the current PIN.
3. Tap Enter.
4. Tap OK to confirm the change and exit settings.
GSM Services
Use the GSM Services tab to configure settings for subscribed phone services. For example, block certain types of
incoming and/or outgoing calls (page 5-8), disclose the caller’s identity when making outgoing calls (page 5-8),
forward incoming calls to a different phone number (page 5-8), receive notification of incoming calls when a phone
session is in use (page 5-9), and set up voice mail and short message service (page 5-9).
1. Tap Start > Settings > Personal > Phone> GSM Services.
Figure 5-4
Phone Window - GSM Services
2. Select a service from the list and tap Get Settings... .
3. Change services settings as follows.
Call Barring (Call Blocking)
Use call barring to block certain types of incoming and/or outgoing calls. Select the type of incoming and/or
outgoing calls to block.
Caller ID
Enable caller ID to reveal the identity of the person making an outgoing call. Select the Everyone radio button to
always display the caller ID. Select the
No one radio button to prevent the caller’s identity from appearing to others.
Call Forwarding
NOTE Call Forwarding may not be available on all networks. Check with the service provider for availability.
To Next Page
Loading...
Need help?
General
