3 - 2 MC65 Integrator Guide
MC65 Setup
The MC65 by default is set up to communicate through a USB connection. Chapter 2, Accessories provides the
accessory setup and cable connection information for use with the MC65. The MC65 communication settings must
be set to match the communication settings used with ActiveSync.
1. On the MC65 tap Start > ActiveSync icon.
2. Tap Menu > Connections.
3. Select the connection type from the drop-down list.
4. Tap OK to exit the Connections window and tap OK to exit the ActiveSync window.
5. Proceed with installing ActiveSync on the host computer and setting up a partnership.
NOTE Microsoft recommends installing ActiveSync on the host computer before connecting the MC65.
To Next Page
Loading...
Need help?
General
