Phone Setup 5 - 7
Figure 5-2
Security Tab
To require a PIN when using the phone:
1. Select the Require PIN when phone is used check box.
Figure 5-3
Enter PIN
2. Use the dialer keypad to enter a four to eight digit PIN.
3. Tap Enter to enable the PIN and return to the Security tab.
Changing a PIN
1. Tap Change PIN.
2. Use the dialer keypad to enter the current PIN.
3. Tap Enter.
4. Use the dialer keypad to enter a new four to eight digit PIN.
5. Tap Enter.
6. Reenter the new PIN for confirmation and tap Enter.
CAUTION If the user enters an incorrect PIN, the message “SIM PIN incorrect: Try again” appears. After three
consecutive incorrect attempts, the SIM card is blocked. The phone does not allow entering a PIN again
and the user must obtain a PIN Unblock Key from the service provider.
To Next Page
Loading...
Need help?
General
