Accessories 2 - 3
Single Slot USB Cradle
This section describes how to set up and use a Single Slot USB cradle with the MC65. For USB communication
setup procedures see Chapter 3, ActiveSync.
The Single Slot USB cradle:
•
Provides 5.4 VDC power for operating the MC65.
•
Synchronizes information between the MC65 and a host computer. See Chapter 3, ActiveSync for
information on setting up a partnership between the MC65 and a host computer.
•
Charges the MC65’s battery.
•
Charges a spare battery.
Setup
Figure 2-1
Single Slot USB Cradle Power and USB Connections
Charging the MC65 Battery
Connect the cradle to power. Insert the MC65 into the MC65 slot to begin charging.
Power Supply
USB Port
Power Port
AC Line Cord
To Next Page
Loading...
