Phone Setup 5 - 5
Configuring a GSM Data Connection
A data connection allows Internet access across a wireless network.
To set up a new data connection:
1. Acquire an Access Point Name (APN) from the service provider.
2. Tap Start > Settings > Connections > Connections > Tasks.
3. Under My ISP select Add a new modem connection.
4. Enter a connection name in the Enter a name for the connection text box.
5. Select Cellular Line (GPRS) from the Select a modem: drop-down list.
6. Tap Next.
7. Enter the APN from the service provider in the Access point name text box.
8. Tap Next.
9. Enter a username in the User name text box, if required by the service provider.
10. Enter a password in the Password text box, if required by the service provider.
11. Enter a domain name in the Domain text box, if required by the service provider.
12. Tap Finish.
13. Tap OK to exit Connections.
NOTE SIM cards of supported carriers automatically configure the data connection upon activation. Data connections
for non-supported carriers must be manually configured.
To Next Page
Loading...
Need help?
General
