Accessories 2 - 27
4. Flip the lever down to create a vacuum between the suction cup and the disc.
5. Make sure that the suction bond is strong enough before proceeding to the next step.
6. Slide the MC65 into the cradle.
Figure 2-28
Vehicle Holder Mounted on Flat Surface
7. Connect the auto charger cable to the MC65 and slide the two locking tabs up to secure the cable cup to the
MC65.
8. Connect the other end to the cigarette lighter socket.
The LED indicator on the right side of the touch screen lights up orange during charging.
To Next Page
Loading...
Need help?
General
