Motorola MT2070 - Page 112

2 - 64 MT2070/MT2090 User Guide
To enter a pass-phrase with characters hidden:
1. Select the For added security - Mask characters entered check box.
2. Tab to Next > and press ENT.
Figure 2-76 WEP-40 and WEP-104 WEP Keys Dialog Boxes
3. In the Key field, enter the key.
a. For WEP-40 enter between 4 and 32 characters.
b. For WEP-104 enter between 4 and 32 characters.
c. For TKIP enter between 8 and 63 characters.
d. For AES enter between 8 and 63 characters.
4. In the Confirm Key field, re-enter the key. When the keys match a message appears indicating that the keys
match.
5. Tab to Next > and press ENT. The IP Address Entry dialog displays.
To enter a pass-phrase key without characters hidden:
1. Tab to Next > and press ENT.
Figure 2-77 Keys Dialog Box
2. In the Key field, enter the key.
a. For WEP-40 enter between 4 and 32 characters.
b. For WEP-104 enter between 4 and 32 characters.
c. For TKIP enter between 8 and 63 characters.
d. For AES enter between 8 and 63 characters.Tab to Next > and press ENT. The IP Address Entry dialog
displays.