About This Guide xxi
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started provides a product overview, unpacking instructions and start up information.
•
Chapter 2, Operating the MT2070/MT2090 describes the device’s screens, and how to use the device.
•
Chapter 3, Scanning describes parts of the device, beeper and LED definitions, and how to scan data.
•
Chapter 4, Radio Communications provides information about the modes of operation and features available
for wireless communication between devices, cradles and hosts, and also includes the parameters
necessary to configure the device.
•
Chapter 5, User Preferences & Miscellaneous Scanner Options describes each user preference feature and
provides the programming bar codes for selecting these features for the device. It also includes commonly
used bar codes to customize how data is transmitted to the host device.
•
Chapter 6, Imaging Preferences describes each imager preference feature and provides the programming
bar codes for selecting these features for the device.
•
Chapter 7, Customizing the MT20X0 provides information about customizing the MT20X0 device for the end
user.
•
Chapter 8, RS-232 Interface provides information for setting up the device for RS-232 operation.
•
Chapter 9, USB Interface provides information for setting up the device for USB operation.
•
Chapter 10, IBM 468X / 469X Interface provides information for setting up the device with IBM 468X/469X
POS systems.
•
Chapter 11, Keyboard Wedge Interface provides information for setting up the device for keyboard wedge
operation.
•
Chapter 12, Symbologies describes all symbology features and provides the programming bar codes for
selecting these features.
•
Chapter 13, Accessories describes all accessories for the device.
•
Chapter 14, Advanced Data Formatting (ADF) describes how to customize scanned data before transmitting
to the host.
•
Chapter 15, Maintenance and Troubleshooting provides information on how to care for the device and
troubleshooting the device and its cradles.
•
Appendix A, Standard Default Parameters provides a table of all host devices and miscellaneous device
defaults.
•
Appendix B, Programming Reference provides a table of AIM code identifiers, ASCII character conversions,
and keyboard maps.
•
Appendix C, Sample Bar Codes includes sample bar codes.
•
Appendix D, Numeric Bar Codes includes the numeric bar codes to scan for parameters requiring specific
numeric values.
•
Appendix E, Alphanumeric Bar Codes includes the alphanumeric bar codes to scan for parameters requiring
alphanumeric values.
•
Appendix F, Signature Capture Code provides information about using the device to capture a signature.
•
Appendix G, Quick Startup Exercises provides exercises to familiarize the user with the device and
accessories. Exercises include establishing connections (ActiveSync and Bluetooth), customizing the Home
Screen menu, modifying the Startup program, remapping the keypad and disabling Scanner Services.
To Next Page
Loading...
