Motorola MT2070 - Revision History

v
Revision History
Changes to the original manual are listed below:
Change Date Description
-01 Rev A 8/2009 Initial release.
-02 Rev A 9/2009 Updates: Keypad; battery information; accessories.
-03 Rev A 10/2011 Updates: USB cable usage with ActiveSync; USB French Belgian Windows bar
code fix; device charging LED update; new screen shots
Additions: Scan-to-IP; ESD dongle information; FIPS; Inverse 1D; Multi-tap
Uppercase First Feature; Code Types: Aztec, Datamatrix, Maxicode, QR code,
MicroPDF.
Removed: Patent information.
-04 Rev A 2/2013 Updates:
- Static CDC is enabled by default.
Additions:
- USB Transmission Speed Parameters (Polling Interval, Fast HID Keyboard,
Quick Keypad Emulation) - with note about re-enumerating the scanner.
- GS1 Databar Limited Security level bar codes.
- Enable/Disable USB HID over STB2000 contact.
- DPM scanning
- New DPM graphic to Scanning Orientation with Imager Aiming Pattern.
-05 Rev A 2/2014 Updates:
- French Belgian Windows bar code
Additions:
- Codabar Upper or Lower Case Start/Stop Characters Detection bar codes
- ADF bar codes:
... Move Cursor Past Specific String
... Move Cursor To Specific String and Replace
... Move Cursor To Last Occurrence of String and Replace All
... Skip To End
Australia Post Format bar code
Composite Beep Mode bar code
ISBT Concatenation Redundancy bar code
USB Ignore Beep Directive bar code
USB Ignore Type Directive bar code
-06 Rev A 6/2014 Additions:
Scan Angle
Adaptive Scanning
Interference Suppression Mode
Interference Suppression Scan Angle
Update:
Device Configurations