USB Interface 9 - 11
USB Ignore Unknown Characters
This option applies only to the HID Keyboard Emulation device and IBM device. Unknown characters are
characters the host does not recognize. Select Send Bar Codes With Unknown Characters to send all bar code
data except for unknown characters. The device issues no error beeps.
Select Do Not Send Bar Codes With Unknown Characters, for IBM devices, to prevent sending bar codes
containing at least one unknown character are to the host, or for HID Keyboard Emulation devices, this sends the
bar code characters up to the unknown character. The device issues an error beep.
USB Ignore Beep Directive
This applies only to IBM handheld, IBM tabletop, and OPOS devices. Scan one of the following bar codes to honor
or ignore a beep directive. All directives are still acknowledged as if they were processed.
*Send Bar Codes with Unknown Characters
(Transmit)
Do Not Send Bar Codes with Unknown Characters
(Disable)
* Honor USB Beep Directive
Ignore USB Beep Directive
To Next Page
Loading...
