13 - 2 MT2070/MT2090 User Guide
Maintenance
See Cradles on page 15-2.
Batteries
Use only Motorola-branded batteries and chargers.
See Battery Charging on page 1-14 and Battery Safety on page 1-15 for detailed battery information.
Mounting
The cradle can be mounted on a desktop or on a wall. Refer to the Integrator Guide for mounting instructions.
Replace the desk mount cup with the wall (vertical) mount cup:
Four slot charge/Ethernet cradle STB2000-C40017R four slot Ethernet cradle charges up to four spare batteries and
up to four devices with batteries installed. It also synchronizes up to four devices
with a host computer through an Ethernet connection. An Ethernet cable is required
for communication (not available from Motorola).
Battery Charger
Four slot spare battery charger SAC2000-4000CR four slot spare battery charger charges up to four single
batteries.
Cables
USB Client Charge Cable
Cable attaches from device/cradle to host PC.
RS-232 Serial Cable with Power
Supply.
Cable attaches from device/cradle to host PC.
Miscellaneous
IntelliStand
The IntelliStand provides a hands-free method of scanning.
Lanyard Wrist strap.
Forklift mount bracket The mounting bracket is used to install the STB2000-F cradle on a forklift.
Belt Holster
Device can be carried on a belt.
Table 13-1
Accessories (Continued)
Accessory Description
To Next Page
Loading...
