14 - 30 MT2070/MT2090 User Guide
Setup Field(s)
Send Data (continued)
Send Next 19 Characters
Send Next 20 Characters
Table 14-2
Setup Field(s) Definitions
Parameter Description Page Number
Move Cursor
Move Cursor To a Character
Scan the
Move Cursor To Character
, then any printable ASCII
character from the
Alphanumeric Keyboard on page 14-91
. This
moves the cursor to the position after the matching character. If the
character is not there, the rule fails and ADF tries the next rule.
14-31
Move Cursor to Start of Data
Scan this bar code to move cursor to the beginning of the data. 14-31
Move Cursor Past a Character
This action moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is ‘A’,
then the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the
Move
Cursor Past Character
, then select a character from the
Alphanumeric Keyboard
. If the character is not there, the cursor
does not move (i.e., has no effect).
14-31
Move Cursor Past Specific
String
This action moves the cursor past the first occurrence of a selected
string.
14-32
Move Cursor to Specific String
and Replace
This action moves the cursor to the start of the first occurrence of a
selected string and replaces that string with another user-defined
string.
14-32
Move Cursor to Last
Occurrence of String and
Replace All
This action replaces all occurrences of a specific string with a
user-defined string and moves the cursor to the beginning of the
last such occurrence.
14-32
Skip to End
This action moves the cursor to the end of the bar code. 14-32
To Next Page
Loading...
