G - 6 MT2070/MT2090 User Guide
MT2000 Scanner Services only when the MT20X0 is used as a mobile computing device. Required equipment:
STB2000, USB cable (p/n CBAU01-S07ZAR) and the MT2070.
1. Access the Platform folder on the device via File Explorer.
2. Delete the ADCServices.reg file.
3. Cold boot the device for the settings to take effect. To cold boot the device, press the number 2 key and
trigger simultaneously until the screen refreshes twice and the characters >>> display on the screen.
NOTE Alternately, you can also stop MT2000 Scanner Services from running programmatically by issuing the
ADCAPI_StopService() C API.
To Next Page
Loading...
