5-10 Computer Group Literature Center Web Site
PPCBug
5
!
Caution
Although a command to allow the erasing and reprogramming of Flash
memory is available to you, keep in mind that reprogramming any portion
of Flash memory will erase everything currently contained in Flash,
including the PPCBug debugger.
Note Both banks A and B of Flash contain the PPCBug debugger.
RL Read Loop
RM Register Modify
RS Register Set
RUN MPU Execution/Status
SD Switch Directories
SET Set Time and Date
SROM SROM Examine/Modify
SYM Symbol Table Attach
NOSYM Symbol Table Detach
SYMS Symbol Table Display/Search
T Trace
TA Terminal Attach
TIME Display Time and Date
TM Transparent Mode
TT Trace to Temporary Breakpoint
VE Verify S-Records Against Memory
VER Revision/Version Display
WL Write Loop
Table 5-1. Debugger Commands (Continued)
Command Description
To Next Page
Loading...
