Motorola MVME2400 Series - APPENDIX A Specifications; Specifications; Table A-1. Specifications

A
A-1
ASpecifications
Specifications
The following table lists the general specifications for the MVME240x
VME processor module. The later sections provide information on cooling
requirements and EMC regulatory compliance.
Specifications for the optional PMCs can be found in the documentation
for those modules.
Table A-1. Specifications
Characteristics Specifications
MPU MPC750 @
233 MHz
16KB/16KB I/D on-chip cache
MPC750 @
350 MHz
32KB/32KB I/D on-chip cache
MPC750 @
450 MHz
32KB/32KB I/D on-chip cache
Memory SDRAM 32MB, 64MB, or 128MB
ECC-protected
Flash 1MB via two 32-pin PLCC sockets
8MB via surface mount
TOD clock device M48T559 8KB NVRAM
Timers One watchdog timer; time-out generates reset
Four real-time 16-bit programmable timers
Power requirements,
with no PMCs installed
(See Note)
+12Vdc, 0mA
–12Vdc, 0mA
(typical)
+5Vdc (
±
5%), 4A typical, 4.75A maximum
with MP603
+5Vdc (
±
5%), 4.5A typical, 5.5A maximum
with MP604
Operating temperature 0° C to 55° C entry air with forced-air cooling (refer to Cooling
Requirements)
Storage temperature –40° C to +85° C