Motorola MVME2400 Series - Configuring the Vmebus Interface

ENV – Set Environment
http://www.motorola.com/computer/literature 6-13
6
Configuring the VMEbus Interface
ENV asks the following series of questions to set up the VMEbus interface
for the MVME240x modules. To perform this configuration, you should
have a working knowledge of the Universe ASIC as described in your
MVME2400 Series VME Processor Module Programmer’s Reference
Guide.
VME3PCI Master Master Enable [Y/N] = Y?
PCI Slave Image 0 Control = 00000000?
The configured value is written into the LSI0_CTL register of the
Universe chip.
PCI Slave Image 0 Base Address Register = 00000000?
The configured value is written into the LSI0_BS register of the
Universe chip.
PCI Slave Image 0 Bound Address Register = 00000000?
The configured value is written into the LSI0_BD register of the
Universe chip.
PCI Slave Image 0 Translation Offset = 00000000?
The configured value is written into the LSI0_TO register of the
Universe chip.
PCI Slave Image 1 Control = C0820000?
The configured value is written into the LSI1_CTL register of the
Universe chip.
PCI Slave Image 1 Base Address Register = 01000000?
The configured value is written into the LSI1_BS register of the
Universe chip.
Y
Set up and enable the VMEbus Interface. (Default)
N
Do not set up or enable the VMEbus Interface.