Motorola MVME2400 Series - PMC Slot 1 (Single-Width PMC); PMC Slot 2 (Single-Width PMC)

Block Diagram
http://www.motorola.com/computer/literature 3-21
3
Refer to Appendix B, Connector Pin Assignments for the pin assignments
of the PMC connectors. For detailed programming information, refer to the
PCI bus descriptions in the MVME2400 Series VME Processor Module
Programmer’s Reference Guide and to the user documentation for the
PMC modules you intend to use.
PMC Slot 1 (Single-Width PMC)
PMC slot 1 has the following characteristics:
For P2 I/O configurations, all I/O pins of PMC slot 1 are routed to the
5-row power adapter card. Pins 1 through 64 of J14 are routed to row C and
row A of P2.
PMC Slot 2 (Single-Width PMC)
PMC slot 2 has the following characteristics:
For P2 I/O configurations, 46 I/O pins of PMC slot 2 are routed to the
5-row power adapter card. Pins 1 through 46 of J24 are routed to row D
and row Z of P2.
Mezzanine Type PCI Mezzanine Card (PMC)
Mezzanine Size
S1B: Single width, standard depth (75 mm x 150 mm)
with front panel
PMC Connectors J11 to J14 (32/64-bit PCI with front and rear I/O)
Signaling Voltage V
io
= 5.0Vdc
Mezzanine Type PCI Mezzanine Card (PMC)
Mezzanine Size
S1B: Single width, standard depth (75 mm x 150 mm)
with front panel
PMC Connectors J21 to J24 (32/64-bit PCI with front and rear I/O)
Signaling Voltage V
io
= 5.0Vdc