Motorola MVME2400 Series - Serial Port Connector - DEBUG (J2; Ethernet Connector - 10 Baset (J3; Table B-3. DEBUG (J2)Connector Pin Assignments; Table B-4. 10;100 BASET (J3) Connector Pin Assignments

Pin Assignments
http://www.motorola.com/computer/literature B-5
B
Serial Port Connector – DEBUG (J2)
A standard RJ-45 connector located on the front plate of the MVME2040x
provides the interface to the asynchronous serial debug port. The pin
assignments for this connector are as follows:
Ethernet Connector – 10BaseT (J3)
The 10BaseT/100BaseTx connector is an RJ-45 connector located on the
front plate of the MVME240x. The pin assignments for this connector are
as follows:
Table B-3. DEBUG (J2)Connector Pin Assignments
1DCD
2RTS
3GND
4TXD
5RXD
6GND
7CTS
8DTR
Table B-4. 10/100 BASET (J3) Connector Pin Assignments
1TD+
2 TD–
3RD+
4 No Connect
5 No Connect
6RD–
7 No Connect
8 No Connect