Keyboard Wedge Interface 6-3
Introduction
This chapter provides instructions for programming the cradle for keyboard wedge host interface, used to connect the cradle between
the keyboard and host computer. The scanner translates the bar code data into keystrokes, and transmits the information to the host
computer via the cradle interface. The host computer accepts the keystrokes as if they originated from the keyboard.
This interface adds bar code reading functionality to a system designed for manual keyboard input. In this mode the keyboard
keystrokes are simply passed through.
Throughout the programming bar code menus, default values are indicated with asterisks (
*).
*North American
Feature/Option
* Indicates Default
To Next Page
Loading...
