Symbol LS4278 Product Reference Guide5-12
Beep After Good Decode
Scan a bar code below to select whether or not the scanner beeps after a good decode. If Do Not Beep After Good Decode is
selected, the beeper still operates during parameter menu scanning and indicates error conditions.
Transmit Code ID Character
A Code ID character identifies the code type of a scanned bar code. This may be useful when the scanner is decoding more than one
code type. In addition to any single character prefix already selected, the Code ID character is inserted between the prefix and the
decoded symbol.
Select no Code ID character, a Symbol Code ID character, or an AIM Code ID character. For Code ID Characters, see Symbol Code
Identifiers on page B-3 and AIM Code Identifiers on page B-4.
*Beep After Good Decode
(Enable)
Do Not Beep After Good Decode
(Disable)
Symbol Code ID Character
AIM Code ID Character
*None
To Next Page
Loading...
