Advanced Data Formatting 14-17
Message Containing A Specific Data String
Use this feature to select whether the formatting affects data that begins with a specific character or data string, or contains a
specific character or data string.
There are 4 features:
• Specific String at Start
• Specific String, Any Location
• Any Message OK
• Rule Belongs to Set
Specific String at Start
Scan this bar code, then scan the bar codes representing the desired character or characters (up to a total of 8) in the Alphanumeric
Keyboard on page 14-77.
After scanning the following bar code:
1. Enter a string using the Alphanumeric Keyboard beginning on page 14-77.
2. Scan End of Message on page 14-85.
Specific String At Start
Specific String, Any Location
Scan this bar code, then, using the Numeric Keypad on page 14-18, scan a two-digit number representing the position (use a leading
“zero” if necessary). Then scan the desired character or characters (up to a total of 8) on the Alphanumeric Keyboard on page 14-77,
followed by the End of Message bar code on page 14-85.
After scanning the following bar code:
1. Enter a location using the “Numeric Keypad” on page 14-18.
2. Enter a string using the Alphanumeric Keyboard beginning on page 14-77.
3. Scan End of Message on page 14-85.
Specific String Any Location
Any Message OK
By not scanning any bar code, all selected code types are formatted, regardless of information contained.
To Next Page
Loading...
