MP Systems R Series - Specifications

6 MPSYSTEMS-M-001/06
4. Specifications
MP SYSTEMS equipment ships with an identification label. The label is located by the main
disconnect on the front of the machine.
Information listed on Identification Label;
 Pump Type
 Serial Number
 Build Date
 Operating Voltage (208-230VAC/460VAC)
 FLA (Full load Amps). Largest load, for determining power service requirements.
The operating voltage may be changed in the field if necessary. Changing the operating
voltage can only be done by specialized personnel. Not available on all systems.
*All specifications are subject to change.