MP Systems R Series - RC Chiller Sleep Mode Settings

60 MPSYSTEMS-M-001/06
9.6.6.1. Settings (RC)
3434 [

] – Setup Menu
CHILLER SLEEP MODE –
Determines if chiller will hibernate when inlet
temperature is equal to target temperature
for a specified time.
Chiller will restart automatically if inlet
temperature is no longer equal to or below
target temperature, or on startup of high pressure
pump.
Default = on
SLEEP MODE DELAY–
Elapsed time before chiller will hibernate when inlet
temperature is equal to target temperature
for a specified time.
Default = 5 min