MP Systems R Series - RC Chiller Mounting Instructions

54 MPSYSTEMS-M-001/06
9.6.2. Mounting Instructions (RC)
 Lift RC unit with properly rated straps
or chains (300lbs);
o Use (4) eye bolts to lift units.
o Orientate as shown.
o Run 1” Inlet hose through lid of
R Series.
 Use the (3) mounting points shown, to
align RC unit in the correct position;
o A person(s) should be present
to assist in alignment.
 Use supplied 1/4‒20 x 3/4" bolts to
fasten RC unit to R Series;
 RC unit mounted.