62 MPSYSTEMS-M-001/06
9.6.8. Maintenance (RC)
Before carrying out any operation on the unit, ensure that the power supply has been
switched to the ‘OFF’ position.
Before working on the unit, carefully read the safety instructions set out in Section 2.
Safety Measures
It is good practice to carry out periodic checks on machine, in order to ensure it is working properly.
Routine maintenance does not require special technical knowledge; however, it should be carried out
by trained personnel.
Maintenance operations are essential for keeping the unit at its highest efficiency, from the point of
view of both efficiency and energy usage.
ROUTINE MAINTENANCE
Group/Component Operation Maintenance Interval
Machine Structure
Visually check condition of
structure (areas of corrosion
and/or dents).
Yearly
Hydraulic Circuit
HOSES – Visual check for
leaks in hydraulic circuit.
Monthly
Electrical Components
Check current usage and
seating of electrical
components.
Yearly
Media Filter
Visually check for debris build
up.
Monthly
To Next Page
Loading...
