45 MPSYSTEMS-M-001/06
8. Maintenance
Before carrying out any operation on unit or accessing internal components, ensure that
the power supply has been switched to the ‘OFF’ position.
Before working on the unit, carefully read the safety instructions set out in Section 2.
Safety Measures
It is good practice to carry out periodic checks on machine, in order to ensure it is working properly.
Routine maintenance does not require special technical knowledge; however, it should be carried out
by trained personnel.
Maintenance operations are essential for keeping the unit at its highest efficiency, from the point of
view of both efficiency and energy usage.
8.1. Routine Maintenance
ROUTINE MAINTENANCE
Group/Component Operation Maintenance Interval
Machine Structure
Visually check condition of
structure (areas of corrosion
and/or dents).
Monthly
Hydraulic Circuit
HOSES – Visual check for
leaks in hydraulic circuit.
Weekly
FILTERS – Replace as
needed.
Daily/Weekly/Monthly
FLUID – Check quality and
cleanliness of fluid in tank.
Monthly
PRESSURE – Check pressure
when machine is in use.
Pressure must be within range
listed on machine.
Monthly
Electrical Components
Check current usage and
seating of electrical
components.
Yearly
To Next Page
Loading...
