MR MSENSE DGA 2 - Safety Markings and Nameplate

4 Product description
Messko GmbH 202020 BA4001150/10 ENMSENSE
®
DGA 2/3
4.4 Safety markings and nameplate
The following safety markings are used on the product:
Figure2: Safety markings and nameplate
Description
1 Warning sign "Do not close!" on the slide valve
2 Nameplate
3 Observe the documentation
4 Observe the documentation: See the note about the oil extraction
adapter in the chapter "Installing MSENSE® DGA 2/3" [►Section
6.2.2, Page 30]
5 Ground connection on the ball valve
Table4: Safety markings and nameplate