MR MSENSE DGA 2 - Removal; Removing the MSENSE DGA 2;3

11 Removal
Messko GmbH 202080 BA4001150/10 ENMSENSE
®
DGA 2/3
11 Removal
CAUTION
Hot oil escape
Risk of injury and slipping.
► Wear safety clothing.
► Carry out the operating steps in the specified sequence.
► Ensure that the gate valve remains closed after the removal of the de-
vice.
DANGER
Electric shock!
Risk of fatal injury due to electrical voltage. Always observe the following
safety regulations when working in or on electrical equipment.
► Disconnect the system.
► Lock the system to prevent an unintentional restart.
► Ensure all poles are de-energized.
► Cover or cordon off adjacent energized parts.
► Disconnect electrical cabling correctly.
NOTICE
Damage to the device!
Electrostatic discharge can lead to damage to the device.
► Take precautionary measures to prevent the build-up of electrostatic
charges on work surfaces and personnel.
11.1 Removing the MSENSE® DGA 2/3
1. Undo and remove the chain connector.
Figure59: Releasing the chain